| Installation
< Go back |
Installation - The
Liberty
Because the Liberty is designed to handle greater than normal
wind loads, correct installation is essential. A portable base
option is available but not recommended for the
Liberty.
 |
 |
 |
Standard Spigot included
with each Astral |
Heavyweight
Base Plate (optional) |
In Ground Fitting (optional) |
The 2
15/16" diameter mast fits directly onto the Spigot as a
sleeve. The Spigot can be bolted directly into a concrete patio
or timber deck if the Liberty is not to be seasonally stored.
We strongly recommend you purchase a Heavyweight Base Plate for
the Liberty, which will provide additional strength and stability
for this larger shademaker. The round Heavyweight Base Plate is
used to attach the Liberty to a timber deck or concrete patio. It
is galvanized and powder coated steel so it will not rust. The
powder coating is charcoal grey to match the Standard Spigot. The
diameter of the Heavyweight Base Plate is 400mm (approx.
16") and 1/4" thick. The Heavyweight Base Plate is
first bolted to concrete or timber using the special bolts
included with your Liberty. The Standard Spigot is then screwed
into the Heavyweight Base Plate. If you want to remove your
Liberty for seasonal storage, you simply undo the four screws and
remove the Spigot from the Base Plate, leaving an unobtrusive
plate in your deck or patio.
If you intend to install your Liberty into anything other than a
concrete patio or timber deck you may need to purchase an
optional Standard In Ground Fitting. Please feel free to contact
us to determine the best installation option for your particular
situation. Made of galvanized steel, this Standard In Ground
Fitting is extremely strong and will not rust. The diameter of
the plate is 215mm (approximately 9"). The height is 500m
(approximately 19 1/2 "). Installing an In Ground Fitting
requires digging a suitable-sized hole, pouring concrete and
placing the In Ground Fitting into the concrete. The Spigot is
then bolted onto the In Ground Fitting.
| Prices for the Liberty
fittings and accessories |
| Base plate |
£49 |
| Extra spigot |
£65 |
| Matching canvas cover bag |
£155 |
| Portable alloy base |
£150 |
| Replacement 3.0m canopy |
£479 |
| Replacement 3.4m canopy |
£479 |
| Replacement 3.8m canopy |
£479 |
| Colour logo - one off set-up |
£275 |
| Printing per panel - models up to 4m |
£37 |
| Valances - models up to 4m |
£150 |
| All prices include
VAT |
To go back to the Liberty main page, click here
To see the other models, click
here |
