| Installation
< Go back |
Installation - The
Resort
The Resort is an extra large and extra strong sidepost
structure.To ensure longevity, it needs to be assembled and
installed professionally . Because it is designed to handle
strong winds, it is recommended that the Resort be either
anchored to a substantial concrete slab or installed in-ground.
We do not suggest using the Resort on a timber deck, nor do we
offer any type of portable base. Due to the heavy nature of the
Resort (weighing approximately 150kg ) it is not intended to be
removed except in preparation for very severe weather conditions,
therefore a Base Plate is not necessary.
 |
 |
Spigot is included
with each Resort |
Resort
In-Ground Fitting (optional) |
The mast of the Resort fits directly onto the Spigot as a sleeve.
The Resort Spigot may be bolted directly into concrete if the
concrete pad is substantial and in good condition,but wherever
possible we recommend using a Resort In Ground Fitting for extra
stability. The spigot is 400mm in diameter (approximately
16").
The Resort In Ground Fitting is designed specifically for the
Resort shademaker. We recommend purchasing this fitting, pouring
concrete and then installing the fitting as per our instructions.
The gold passivated, metal protected fitting will not rust and
gives this very large SHADEmaker the necessary in/underground
strength to make it last years and years. The diameter of the
plate on the Resort In Ground Fitting is 400mm (approximately
16") and the height of the fitting is 1.0m approximately
39").
| Prices for the Resort
fittings and accessories |
| In-ground fitting |
£250 |
| Timber crate for transport |
£poa |
| Matching canvas cover bag |
£250 |
| Replacement canopy |
£723 |
| Colour logo |
£275 |
| All prices include
VAT |
To see photographs of a typical Resort installation, click
here
To go back to the Resort main page, click here
To see the other models, click
here
|
